Aerobika® Oscillating Positive Expiratory Pressure (OPEP) Therapy System for Effective Airway Clearance.

Combined Oscillatory PEP and nebulizer treatments reduce overall therapy time which may improve compliance. One device for all patient groups. Oscillations create short bursts of increased expiratory resistance to thin, dislodge and move mucus to the upper airways where it can be coughed out. Aids in lung hygiene and helps prevent infections. Improves gas transfer and lowers air trapping.

Features & Benefits:

• One device for all patient groups.
• 5 resistance settings adjust to each patient’s capacity .
• Shorter treatment times than traditional chest physiotherapy.
• Easy to learn for independent use.
• Inexpensive, quiet and portable device.
• Little interruption to daily living.
• At least as effective as manual chest physiotherapy.
• Durable design is easy to clean/disinfect and is dishwasher safe.
• Resistance is not position dependent so patients can hold the device in the most natural position.
• Standard 22 mm fitting accommodates small volume nebulizers.
• Low-resistance valve allows inhalation and exhalation without removing from mouth.

How to disassemble your Aerobika® PEP Therapy Device

1. Press the Attachment tables on either side of the device. Holding the tabs in, gently pull up on the case until the two parts separate.
2. Remove the valve cartridge. DO NOT disassemble any part of the cartridge.
3. To remove the mouthpiece, grip firmly and rotate while pulling away from the device.

How to clean your Aerobika® PEP Therapy Device

Designed for 12 months of use in the clinic, hospital or at home; Aerobika® OPEP therapy machine is dishwasher safe and designed for correct reassembly.

Soap and water

1. Wash the four parts in a solution of lukewarm clean water and liquid soap detergent, allowing the parts to soak for 15 minutes. Agitate gently.
2. Rinse in warm water.
3. To dry, shake the parts to remove any excess water. Allow parts to air dry thoroughly before you put the parts back together.

Dishwasher

1. The four disassemble parts may be washed in a dishwasher by securing parts in a basket on the top rack. Wash in a normal wash cycle with dishwasher detergent.
2. If excess water remains, shake the parts and allow to air dry thoroughly before reassembling.
3. Dishwashing with overly dirty dishes in not recommended.

These are abbreviated instructions for use, please remember to read the complete instructions that are packaged with your device.